For Sale 35mm carbon tubular wheels - NEW

danny

Maximum Pace
Feb 29, 2008
160
50
58
Chofu-shi, Tokyo
www.cyclism.jp
#1
These were a special order in 2012 from Yoeleo. Lightweight and strong. Paid 50,000 yen.

  • New. Never used, never glued.
  • 35mm tubular
  • 24/28 spoke count
  • Light weight: front - 531g / rear - 669g
  • 2 x free hubs, 10sp (Shimano and Campagnolo)
  • Matte black
  • 35,000 yen

Thanks!
Danny



 
Last edited:
Likes: Cactaur

TCC

Tokyo Cycling Club
Jun 30, 2013
2,362
1,291
133
#6
Depends which Bitex EDHub it is. If it is an RAR9, then no. It is an RAR12, then possibly yes.

@Musashi13 had the same issue before, I think (?)

@danny, can you get some more close up shots of the rear hub, showing all flanges from all angles? We will be able to find out what model they are then, and give Bitex a shout on Skype (they are pretty good to speak to direct).
 

TCC

Tokyo Cycling Club
Jun 30, 2013
2,362
1,291
133
#11
There are 10 speed. Impossible to upgrade to 11 speed.

For 35,000yen, these would be good (if you want 24/28) for the rims, spokes and front hub alone, even if you have to build an 11 speed hub into the rear.

35,000yen is about how much you pay for 2 FarSports / Yoeleo rims direct from them, including postage and Paypal fee.

If I was going for these, at 11 speed, I would possibly just buy an 11 speed version of the rear hub (Bitex EDHub RAR12), and build that in with the same spokes.
 

Musashi13

Maximum Pace
Aug 27, 2012
1,777
1,108
143
41
Ichikawa, Chiba
#13
Making sure that the spoke lengths are the same first is the research you would have to do.

Mine were able to be used on the 11s hub but you would have to be careful and check. not all hubs even from the same manufacturer are the same and being three years old the design may have changed enough for spoke lengths to be affected.
 

TCC

Tokyo Cycling Club
Jun 30, 2013
2,362
1,291
133
#15
Making sure that the spoke lengths are the same first is the research you would have to do.

Mine were able to be used on the 11s hub but you would have to be careful and check. not all hubs even from the same manufacturer are the same and being three years old the design may have changed enough for spoke lengths to be affected.
The measurements between the current RAR9 and RAR12 are essentially identical and will allow for the same spoke lengths to be used. As for them being the same between the 2012 RAR9 and the 2015 RAR12; yeah, that needs checking out.

There's a good chance that the Campy free hub is 11 speed, can anyone confirm this?
http://www.bitexhubs.com/htm/products_detail.php?p=5334cce32e595

There is only one Campagnolo freebody available, so if all Campy stuff is 11 speed, and was back in 2012, then I would hazard a guess and say yes, it is 11 speed compatible. That is not the issue here though; the issue here is Shimano 10 to 11 speed.
 
Likes: Darwin D